EPOXY FLOOR

Technical specifications

MORTAR

  • Is a folder from 1/8 to ¼ of an inch, produced from polymers and silica sand, which provides a non-porous surface easy to clean and high resistance to impacts.
  • It prevents the hosting and accommodation of bacteria, ideal for areas of packaging and processing products, as well as laboratories and hospitals.
  • This system is resistant to abrasion as well as the constant spilling of acids and strong chemicals.
  • The epoxy provides the finishes versatility in various colors that allow the image that the company is seeking.
  • For applications over new concrete, it must have at least 28 days of draining in order to achieve its curing and resistance.
  • The maximum humidity of the substrate must be less than 4%.
  • In order to check humidity, a moisture meter may be used or apply the test of plastic. which consists of placing a piece of plastic on the surface for 24h. If condensation appears under the plastic, moisture or vapor transmission is present.
  • Substrates with greater than or equal to 4% moisture need to use a vapor barrier.
  • Pour into a clean, dry container, 2 parts of product A with 1 part of product B, strictly maintaining its proportions.
  • We recommend using a low-speed electric drill (300-400. Rpm).
  • Mix well to achieve homogeneity, for about 3 minutes.
  • To make non-slip coatings or epoxy mortars thicker consult our technical department, to indicate the amount of silica or quartz sand required.
  • The product contains substances that if being in contact with the skin and/or inhaled for prolonged periods may cause serious health damage.
  • The information contained in this document was given in good faith, based on the experience and knowledge that Servitetop inc. has about the product as long as they have stored, handled and applied it under normal conditions in accordance with the instructions and recommendations of Servitetop inc.
  • The information contained herein does not exonerate the user to make the necessary testing of products in places where it will be applied to obtain the best results.
  • 2 years in tightly sealed containers, in dry and cool environment.
  • mortar epoxy