Concrete Grinder SW588
November 2, 2018
Concrete Grinder SW600
November 3, 2018
Show all


$300.00 $210.00

The SVFLOOR-225 is a pure Metallic Floor Coating 100% solids, 2 component epoxy. It is a specially formulated epoxy with a pearlescent metallic pigment. It is roller or squeegee applied to your floor. This coating requires a primer coat, metallic 100% solids epoxy base coat with effects kit, and a UV resistant urethane or 100% solids epoxy clear-coat.

The finished look is a smooth, glass like finish that has a unique and subtle reflective sparkle. No two floors will ever look the same.

There are endless creative techniques that can be used to create a style that you can call your own.

Some of our customers say Pure Metallic Floors resemble moon craters, a lava lamp, lighting strikes, marble countertops, shimmery glitter paint and they appear three dimensional.

SKU: N/A Categories: ,

Attributes / Advantages:

  • Easy preparation, mixing ratio 2:1.Excellent mechanical properties.
  • Good resistance to abrasion.
  • Good chemical resistance.
  • When required floors with higher chemical or mechanical strength, the system can be mixed with silica or quartz sand to make non-slip floors or mortars up to 8mm thick.

Method of Application:

  • For applications over new concrete, it must have at least 28 days of draining in order to achieve its curing and resistance.
  • The maximum humidity of the substrate must be less than 4%.
  • In order to check humidity, a moisture meter may be used or apply the test of plastic. which consists of placing a piece of plastic on the surface for 24h. If condensation appears under the plastic, moisture or vapor transmission is present.
  • Substrates with greater than or equal to 4 % moisture need to use a vapor barrier.


Data Sheet | Hoja Técnica

Additional information